Pengikut

Contac Person

Posted by Printer Jadul On 3 comments

Nama Lengkap : M. KHUSNAN KHAMID

Alamat : Jl. Rambipuji No.129 Balung Jember


Untuk menghubungiku bisa langsung call ke
081 233 810 610
(0331)3004769

via Yahoo mesengger






Baca Selengkapnya...

RESET PRINTER & CATRIDGE HP

Posted by Printer Jadul On 79 comments

Saya Sertakan naskah asli cara reset hp type 9xx dan reset catridge hp.

Permasalahan. : Printer Hp kebanyakan punya penyakit blink setelah di ganti2 catridge. Jadi pada suatu saat printer tidak akan bisa diganti catridge walaupin dengan yang baru. Masalah blink ini sudah banyak terjadi pada hp A3 yang baru HP 1180c dan HP 1220.

Cara reset printer :

  1. Masukan catridge yang di aggap bagus (printer msh blink)
  2. Matikan printer.
  3. Tekan dan tahan tombol power sampai head bergerak lalu lepas.
  4. Apabila catridge bagus blink langsung hilang. Printer sudah dpt digunakan.

Cara reset catrridge hp (dibawah telah dijelaskan detail).

  1. Pertama tutup dengan selotip titik2 pada catridge yang berwarna Biru. (berapa titik yang ditutup tergantung type catridge).
  2. Buka tutup printer lalu masukan catridge pada printer. Tutup kembali
  3. Biasanya printer langsung tidak blink.
  4. Buka kembali catridge dan cabut selotip yang menempel
  5. Tutup titik2 yang berwarna Hijau dengan selotip
  6. Buka tutup printer lalu masukan catridge pada printer. Tutup kembali
  7. Buka kembali catridge dan cabut selotip yang menempel
  8. Catridge sudah bisa digunakan.

(ini naskah aslinya)

"Zeroing" of cartridges (dump of memory of the printer about cartridges)

Printer HP 9xx series stores(keeps) in the memory the information on two last cartridges and color and black (their identifiers and использованое quantity(amount) of ink). In listing on a code 41 it is possible to lo-ok at it. That the printer has apprehended the filled cartridge as new, it is necessary to jam the information on an ended cartridge. To make it it is possible or installation of the third unique картирджа, or симитировав a unfamiliar cartridge for the printer. (All told fairly both for black, and for a color cartridge):

The service menu of printers HP 9xx series

The service menu is caused with the help of buttons on the case. It is necessary for this purpose:

  • To include the printer;
  • To enter a two-place code of a service command(team), keeping the button of inclusion of a feed(meal);
  • To release(let off) the button of inclusion of a feed(meal);
The printer will execute the set action or will unpack(will print out) the required test.

ZEROING OF BLACK CARTRIDGE НР C6615

1. Gain on a table a cartridge the printing head, and contacts upwards.

2. Stick contacts 13 and 23, marked on figure red color.

3. Insert into the printer, press "ОК" after that.

4. Take again a cartridge from the printer and stick contacts 67 and 69, marked with green color. (Together with 67 and 69 contacts it is possible to stick contacts 68 and 6А.)

5. Insert a cartridge into the printer and include the printer.

6. Switch off the printer and take a cartridge from the printer, clean(remove) an adhesive tape from all contacts, wipe carefully all contacts by spirit and insert a cartridge back into the printer

ZEROING OF COLOR CARTRIDGE НР C6578

1. Gain on a table a cartridge the printing head, and contacts upwards.

2. Stick contacts 10, 11, 12 and 13, marked on figure blue color.

3. Insert into the printer, press "ОК" after that.

4. Take again a cartridge from the printer and stick contacts 60, 61, 62 and 63, marked with green color.

5. Insert a cartridge into the printer and include the printer.

6. Switch off the printer and take a cartridge from the printer, clean(remove) an adhesive tape from all contacts, wipe carefully all contacts by spirit and insert a cartridge back into the printer


ZEROING OF CARTRIDGES

НР C6656, С6657

1. To gain on a table a cartridge the printing head, and contacts upwards.

2. To stick the contact marked in figure with green color. To insert into the printer, to press "ОК" after it(he) will swear concerning a cartridge, to give it(him) to unpack(print out) test page and to get it(him) again.




1. Not touching the first stuck contact to stick in addition still the second - it agrees shown on figures. To insert into the printer a cartridge with already two stuck contacts, again to wait while it(he) will swear and will print page and again to get it(him) for the further actions.

2. To clean(remove) an adhesive tape from the first stuck contact, to insert into the printer, to wait for identifications of a cartridge and again to get it(him).

3. To clean(remove) an adhesive tape from all contacts, to wipe spirit.

4. ALL! Insert a cartridge - the printer of it(him) identifies, as new, i.e. the information on the identifier of the given cartridge is replaced with another. Certainly it is possible anything and to not glue, if there are in a stock 3 cartridges.

5. At whom it has turned out - I ask in a forum.


Baca Selengkapnya...

Banner Sahabat


Printer Jadul