MERESET WASTE INK COUNTER PADA
CANON MP160 DAN MP145
1. Matikan printer (kabel power masih
tercolok), tekan dan tahan tombol
STOP/RESET kemudian tekan tombol
ON/OFF
2. Tahan tombol ON/OFF, tekan tombol
STOP/RESET 2x
3. Lepaskan kedua tombol dan printerakan masuk ke SERVICE MODE
4. Printer akan charging
5. Setelah printer selesai charging,tekan tombol STOP/RESET 4x.
6. Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF
akan berubah warna hijau dan oranye.
7. Matikan printer dan cabut kabel POWER.
8. Hidupkan kembali printer
Kode Error Canon MP160 dan MP145
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported
ink cartridge is installed, or the ink cartridges are not
installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support
Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error
ini nich yang mau donlot resetternya....
MPTool.exe
1 comments:
gak bisa................
:18 :19 :20 :21 :22 :23 :24 :25
:26 :27 :28 :29 :30 :31 :32 :33
:34 :35 :36 :37 :38 :39
Posting Komentar